Category Archive: Table Saw

Nov 22 2015

Building a Deck

We needed something to replace the old concrete stoop for our front door, so I decided to build a deck to replace it. We had the contractor remove the stoop when he was removing our old sidewalk and driveway. It was cracked and people had to step backwards down the steps when we opened our door. …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/building-a-deck/

Nov 06 2015

Making Valances for Our Bedroom Windows

Over on ToolGuyd, I reviewed the Woodpeckers X-Mat Deluxe kit 1. One of the projects I used the X-Mat system for was to make some valances for our bedroom. In the summer, it is really hard to sleep past 6 am in the morning because the sun comes out and is very bright in …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/making-valances-for-our-bedroom-windows/

Jun 11 2015

Down Draft Table

When I wrote the post for ToolGuyd — Project: Making a T-Track Table Top on a Budget, a commenter said he wanted more information about my down draft table. Turns out I never posted the project here. I built this several years ago so the assembly pictures are from then and the assembled …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/down-draft-table/

Feb 18 2015

Treehouse Bed

My son’s treehouse bed is possibly the largest, most complex project I have attempted. It took over a year to complete. After planning and partially building this project, I discovered the finished pieces wouldn’t fit out the door. This set me back several months as I tried to …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/treehouse-bed/

Jan 02 2015

Making a Baby Gate Puppy Proof

Baby gates are designed to keep babies out of trouble, not to keep a 50 pound German Shepard puppy at bay. Even the staying power of this heavy duty gate was only as good as its friction fit, which due to the chair rail in the way wasn’t very good at …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/making-a-baby-gate-puppy-proof/

Jan 31 2013

New Wooden Wallet

As of the last wooden wallet post, I was waiting for inspiration on how to hold the cards and cash at the same time. Last Fall, inspiration finally did come from the weirdest place: window hardware. I had been looking for some spring steel and I found what are called window controls. Window controls are springs …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/new-wooden-wallet/

Sep 15 2012

Table Saw Cart: The Carcass

Since I can buy a whole stick of 8′ of “quality” grade 1×4 pine for less than I can buy 1 board foot of any other material, I decided to make the carcass of the table saw stand using pine and 1/4″ plywood. Yes, pine is a softer wood, but I’m not …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/table-saw-cart-the-carcass/

Sep 12 2012

Planning A New Table Saw Cart

I’ve recently discovered the joys of having all of a tool’s accessories within reach of the tool. In between projects, I’ve been slowly reorganizing my shop so I don’t have to walk across the shop three times to perform a simple task. My latest focus has been my table saw, it currently sits atop a quickly …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/planning-a-new-table-saw-cart/

Sep 10 2012

Checkerboard And Checkers

It happens to all of us, you start a project, something more important comes around, and you forget about the first project for a while. I started gluing up a checkerboard in March, then something came up and I ended up leaving the finished glue-up sitting flat on my bench for about a week. When I …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/checkerboard-and-checkers/

Jul 27 2012

Wooden Wallet

About a month ago Stuart over at ToolGuyd posted the Slim Timber Wood Wallet. Since the wallet sold for $45 and it looked like a simple thing to create, he wondered what the best way of making a DIY version would be. I thought about it for a while …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/wooden-wallet/