Category Archive: Pocket Hole

Jun 11 2015

Down Draft Table

Categories:

Cordless Drill, Miter Saw, Pine, Pocket Hole, T-Track, Table Saw

June 11, 2015

When I wrote the post for ToolGuyd — Project: Making a T-Track Table Top on a Budget, a commenter said he wanted more information about my down draft table. Turns out I never posted the project here. I built this several years ago so the assembly pictures are from then and the assembled …

Permanent link to this article: http://workshop.electronsmith.com/content/down-draft-table/

Sep 15 2012

Table Saw Cart: The Carcass

Categories:

Finish Nailer, Miter Saw, Pin Nailer, Pine, Plywood, Pocket Hole, Router Table, Table Saw, Table Saw Cart

by benjamen

September 15, 2012

Since I can buy a whole stick of 8′ of “quality” grade 1×4 pine for less than I can buy 1 board foot of any other material, I decided to make the carcass of the table saw stand using pine and 1/4″ plywood. Yes, pine is a softer wood, but I’m not …

Permanent link to this article: http://workshop.electronsmith.com/content/table-saw-cart-the-carcass/