Monthly Archive: September 2012

Sep 19 2012

Table Saw Cart: Stationary And Mobile Base

Categories:

Pine, Table Saw Cart

by

September 19, 2012

Originally I had just planned to use locking castors on the base of the table saw cart, but after I actually mounted the castors, I immediately ran into two problems. Since this cart is much lighter than my previous cart, it wanted to slide around the floor when I was using it. …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/table-saw-cart-stationary-and-mobile-base/

Sep 15 2012

Table Saw Cart: The Carcass

Categories:

Finish Nailer, Miter Saw, Pin Nailer, Pine, Plywood, Pocket Hole, Router Table, Table Saw, Table Saw Cart

by

September 15, 2012

Since I can buy a whole stick of 8′ of “quality” grade 1×4 pine for less than I can buy 1 board foot of any other material, I decided to make the carcass of the table saw stand using pine and 1/4″ plywood. Yes, pine is a softer wood, but I’m not …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/table-saw-cart-the-carcass/

Sep 12 2012

Planning A New Table Saw Cart

Categories:

Table Saw, Table Saw Cart

by

September 12, 2012

I’ve recently discovered the joys of having all of a tool’s accessories within reach of the tool. In between projects, I’ve been slowly reorganizing my shop so I don’t have to walk across the shop three times to perform a simple task. My latest focus has been my table saw, it currently sits atop a quickly …

Continue reading »

4 comments

Permanent link to this article: http://workshop.electronsmith.com/content/planning-a-new-table-saw-cart/

Sep 10 2012

Checkerboard And Checkers

Categories:

Belt Sander, Birch, Games, Maple, Miter Saw, Miter Sled, Paste Wax, Purple Heartwood, Table Saw, Urethane, Walnut

by

September 10, 2012

It happens to all of us, you start a project, something more important comes around, and you forget about the first project for a while. I started gluing up a checkerboard in March, then something came up and I ended up leaving the finished glue-up sitting flat on my bench for about a week. When I …

Continue reading »

2 comments

Permanent link to this article: http://workshop.electronsmith.com/content/checkerboard-and-checkers/

Sep 04 2012

Cookie Cutter Rack

Categories:

Organization, Poplar

by

September 4, 2012

My wife has taken cutting the crusts off my kids peanut butter and jelly sandwiches to a whole new level: she uses cookie cutters to cut the sandwiches into shapes. This means that rather than storing the cookie cutters away in a drawer somewhere and only pulling them out every once in a while, the …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/cookie-cutter-rack/