Category Archive: Dado Stack

Nov 06 2015

Making Valances for Our Bedroom Windows

Categories:

Block Plane, Cordless Drill, Dado Stack, Finish Nailer, Minwax Stain, Miter Saw, Pin Nailer, Polycrylic, Pull Saw, Quick Clamp, Red Oak, Table Saw, ToolGuyd, X-Mat System

by

November 6, 2015

Over on ToolGuyd, I reviewed the Woodpeckers X-Mat Deluxe kit 1. One of the projects I used the X-Mat system for was to make some valances for our bedroom. In the summer, it is really hard to sleep past 6 am in the morning because the sun comes out and is very bright in …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/making-valances-for-our-bedroom-windows/

Sep 15 2011

Storage Cubby

Categories:

Baltic Birch Plywood, Dado Stack, Miter Saw, Shop, Table Saw

by

September 15, 2011

Click on Image for Slideshow Several months ago, I wanted to practice making cuts with my dado stack so I built this little cubby to hold some safety equipment like goggles, gloves, respirator, etc…

Permanent link to this article: http://workshop.electronsmith.com/content/storage-cubby/

Jun 28 2011

New Router Table Fence: The Frame

Categories:

Baltic Birch Plywood, Dado Stack, Drill Press, Miter Saw, Oscillating Tool, Phenolic Coated Plywood, Router Table, Router Table Build, Table Saw

by

June 28, 2011

Since I gave my old router table fence away, I needed to make a fence for my new router table — the old fence was too small for the larger table I built anyway. I didn’t follow any specific set of plans when I made the fence, rather I used the …

Continue reading »

Permanent link to this article: http://workshop.electronsmith.com/content/new-router-table-fence-frame/

Apr 26 2011

Putting The Router Table Top Together

Categories:

Dado Stack, Jig Saw, MDF, Router Table Build, T-Track, Table Saw

by

April 26, 2011

When I left off last time, I had finished cutting the holes for the router plate. In this installment I’ll round the corners of the table, mount the T-track, and screw the two halves of the router table top together. Rounding the Corners I chose to round the …

Continue reading »

1 comment

Permanent link to this article: http://workshop.electronsmith.com/content/putting-router-table-top-together/