Category Archive: Router Table

Feb 18 2015

Treehouse Bed

My son’s treehouse bed is possibly the largest, most complex project I have attempted. It took over a year to complete. After planning and partially building this project, I discovered the finished pieces wouldn’t fit out the door. This set me back several months as I tried to …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/treehouse-bed/

Jan 31 2013

New Wooden Wallet

As of the last wooden wallet post, I was waiting for inspiration on how to hold the cards and cash at the same time. Last Fall, inspiration finally did come from the weirdest place: window hardware. I had been looking for some spring steel and I found what are called window controls. Window controls are springs …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/new-wooden-wallet/

Sep 15 2012

Table Saw Cart: The Carcass

Since I can buy a whole stick of 8′ of “quality” grade 1×4 pine for less than I can buy 1 board foot of any other material, I decided to make the carcass of the table saw stand using pine and 1/4″ plywood. Yes, pine is a softer wood, but I’m not …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/table-saw-cart-the-carcass/

Jul 27 2012

Wooden Wallet

About a month ago Stuart over at ToolGuyd posted the Slim Timber Wood Wallet. Since the wallet sold for $45 and it looked like a simple thing to create, he wondered what the best way of making a DIY version would be. I thought about it for a while …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/wooden-wallet/

Jul 26 2012

Wooden Engine Garage (Sodor Steamworks)

My son has amassed quite a few engines in the few short years he’s had his wooden train table. The problem is that there just isn’t enough track to play with all of them, so they end up all over the table and floor. He has a garage that is attached to a round house, …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/wooden-engine-garage-sodor-steamworks/

Jul 10 2012

Heart Shaped Necklace Holder

Sick of my daughter asking me to unsnarl her tangle of necklaces, I decided to build her a necklace tree. After some thought, I figured the tree would be a bad idea because it would be just one more thing to clutter up the horizontal space in her room. So I changed …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/heart-shaped-necklace-holder/

Apr 25 2012

Toy Car 3: Sports Theme

I planned on making another toy car for my nephew and I wanted it to be different. My brother-in-law loves the Vikings, so by default his children do too, and the Vikings colors are purple and gold.  I figured I’d make a car out of yellow and purple heartwood. Purple heartwood is a favorite contrast …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/toy-car-3-sports-theme/

Apr 17 2012

Fixing The Bow In My Table Saw Fence

For a while I’ve noticed that when I rip a clean edge on my table saw and put it up against my fence, there’s a gap between the board and the fence. I’ll take a square to the edge and find out it’s perfectly square, shrug my shoulders, and continue what I …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/fixing-the-bow-in-my-table-saw-fence/

Mar 13 2012

Tablet Stand

I made a permanent mount in the kitchen for my Android tablet a few months ago, but most of the time the tablet doesn’t live there. I find myself using it a lot around the rest of the house, strangely enough even when I’m at the computer where desk space is at …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/tablet-stand/

Mar 05 2012

Cherry Coat Rack

Click here if you don’t have flash Rather than put their coats away, my kids usually throw their coats on the floor. I suppose it’s not all their fault after all, since they really can’t reach the hangers in the closet. Getting sick of the mess, I decided to build a coat …

Continue reading »

Permanent link to this article: https://workshop.electronsmith.com/content/cherry-coat-rack/